+- Proxy Community (https://proxycommunity.com/forum)
+-- Forum: Proxy Types (https://proxycommunity.com/forum/forum-proxy-types)
+--- Forum: VPN (https://proxycommunity.com/forum/forum-vpn)
+--- Thread: Has anyone successfully set up ss5 Linux for a secure SOCKS5 proxy? Need tips! (/thread-has-anyone-successfully-set-up-ss5-linux-for-a-secure-socks5-proxy-need-tips)
Has anyone successfully set up ss5 Linux for a secure SOCKS5 proxy? Need tips! - proxyNomad77 - 29-07-2024
Hey everyone,
Has anyone here successfully set up ss5 Linux for a secure SOCKS5 proxy? I’ve been trying to get it running for a while now, but I keep hitting snags.
I followed the docs, but the config feels a bit messy, and I’m not sure if I’m missing something obvious.
Any tips or gotchas to watch out for? Like, does ss5 Linux play nice with firewalls or do I need to tweak something extra?
Also, if you’ve got a solid config file or some pro tips, pls share! Would save me a ton of headache lol.
Thanks in advance!
“” - StealthOrbit99 - 28-09-2024
Hey! I had the same issue with ss5 Linux a while back. The config can be a bit tricky, but I found that using `iptables` to manage firewall rules helped a ton.
Also, check out this guide: [ss5 setup guide](https://example.com/ss5-guide). It’s super detailed and saved me a lot of time.
Good luck!
“” - secureHawk77 - 06-10-2024
Yo, ss5 Linux is a beast to set up, but once you get it, it’s smooth sailing. One thing that tripped me up was the authentication part. Make sure your `/etc/opt/ss5/ss5.conf` file has the right user/pass setup.
If you’re stuck, try this tool: [ss5 config generator](https://example.com/ss5-tool). It auto-generates configs based on your setup.
“” - proxyHorizon99 - 12-01-2025
Hey, I’ve been using ss5 Linux for a while now. The biggest gotcha for me was the firewall. You’ll need to open the port you’re using for the SOCKS5 proxy (default is 1080).
Also, double-check your `/etc/opt/ss5/ss5.passwd` file. If the permissions are wrong, it won’t work.
“” - robbyXchange - 31-01-2025
ss5 Linux is great, but yeah, the docs are a bit vague. I’d recommend using `systemctl` to manage the service. It makes restarting and checking logs way easier.
Here’s a quick command to check if it’s running:
`sudo systemctl status ss5`
If it’s not, check the logs with `journalctl -u ss5`.
“” - WebNomad77 - 09-02-2025
Dude, I feel your pain. ss5 Linux can be a headache. One thing that helped me was using `ufw` instead of iptables. It’s simpler to manage.
Just run:
`sudo ufw allow 1080`
And make sure your `/etc/opt/ss5/ss5.conf` has the right bind address.
“” - fastXchangeX - 04-03-2025
Hey! I had a similar issue with ss5 Linux. Turns out, I was missing the `auth` section in the config file. Make sure it looks something like this:
```
auth 0.0.0.0/0 - u
permit u 0.0.0.0/0 - 0.0.0.0/0 - - - - -
```
Also, check out this forum thread: [ss5 troubleshooting](https://example.com/ss5-forum).
“” - ghostStorm_77 - 10-03-2025
ss5 Linux is solid, but yeah, the setup can be messy. One pro tip: use `ss5 -t` to test your config before starting the service. It’ll save you a lot of headaches.
Also, make sure your `/etc/hosts.allow` and `/etc/hosts.deny` files aren’t blocking the proxy.
“” - cloakRun99 - 13-03-2025
Hey, I’ve been using ss5 Linux for a secure SOCKS5 proxy for a while. The biggest issue I ran into was SELinux blocking it. If you’re on a distro with SELinux, you might need to adjust the policies.
Here’s a quick fix:
`sudo setsebool -P httpd_can_network_connect 1`
“” - ghostDash99 - 14-03-2025
ss5 Linux is awesome, but yeah, the config can be a pain. One thing that helped me was using `ss5 -d` to run it in debug mode. It spits out a ton of info, but it’s super helpful for troubleshooting.
Also, check out this GitHub repo: [ss5 config examples](https://example.com/ss5-github).